Hoshizaki KM-1100MAH Ice Machine Head


Tested by our certified technicians and works great!

Due to water damage to the condenser coil fins (see last picture), our technicians highly recommend not installing this unit in a hot location. A hot environment may cause it to over-work the compressor or not be able to keep up to ice production.  In our mid 60°F testing area, this worked and produced ice as it should.

30-1/4″ Wide x 27-1/2″ Deep x 32-1/2″ Tall
Please make sure this will fit your current bin before purchasing

208-230 Volt – 1 Phase – 10.8 Amp
Your voltage must be selected via switch inside the machine
Will need hardwired into power

Head only – no bin or dispenser included

1 in stock

Categories: ,

From the manufacturer:

  • Up to 1184 lbs of ice produced per 24 hours
  • Produces crescent shaped ice cubes
  • Durable stainless steel exterior
  • Compatible bins & dispensers, sold separately: B-500, B-700, B-800, B-900, B-1150, B-1300, B-1500, B-1650
  • EverCheck™ alert system
  • CycleSaver™ design
  • Protected by H-GUARD Plus Antimicrobial Agent
  • R-404A refrigerant (3 lbs. 15.5 oz. / 1800 g)
  • Heat Rejection:18400 BTU/hr
  • Ambient temperature range: 45 – 100°F
  • Water temperature range: 45 – 90°F
  • Water pressure: 10 – 113psig
  • Voltage range: 187 – 253V
  • 10.8 amps (20 Amp Max fuse)
  • 5.02 kwh/100 lbs.@ 90/70
  • Single phase, 208-230v/60/1
  • Clean ice and easy maintenance lead to longer unit life span

• Icemaker Water Supply Line: Min. 3/8” Nominal ID Copper Water Tubing or Equivalent
• Icemaker Drain Line: Min. 3/4” Nominal ID Hard Pipe or Equivalent
• Condenser Water Supply Line: Min. 3/8” Nominal ID Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Min. 3/8” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent
• Panels easily removed and all components accessible for service.
• Allow 12” (30 cm) clearance at rear, sides, and top for proper air circulation and ease of maintenance/service.